SC1100: 100% solids low viscosity epoxy primer designed to deeply penetrate and seal all concrete substrates prior to topcoat application of epoxy. This primer virtually eliminates outgassing, which is common when applying an epoxy on concrete surfaces.
SP2000: 100% solid epoxy designed for immersion service with added flexibility and impact resistance. Typical use: cooling tower basins, floor coating, fountains etc. Has excellent bonding to damp to wet substrates and will cure under water.
SC3300: 100% solids Novolac epoxy designed for long-term chemical immersion service. This product offers excellent chemical resistance for numerous chemicals including up to 98% sulfuric acid.
SC5400: 100% solids ceramic filled Novolac epoxy engineered for elevated temperature, excellent chemical and abrasion resistant. Petroleum tank linings, pressure vessels, heat exchangers, refinery piping and valves are typical uses.
R200: 100% solids Novolac epoxy spray applied using heated plural component equipment. High build coating that cures rapidly even at cold temperatures. Yields a glass-like finish.
EP2920: 100% solids flexibilized epoxy that is a trowelable paste designed for vertical expansion joints (concrete and/or metallic), including joints in cooling tower basins requiring chemical resistance.
ER2000: 100% solids flexibilized epoxy that is pourable for expansion joints requiring chemical resistance.
SL100: 100% solids polymer cement for the rebuilding and repair of concrete structures in the wastewater environment such as manholes and wet wells.
TFLOOR: 100% solids polymer cement engineered for horizontal concrete repair.
NOVOLITE: 100% solids polymer cement that has been designed for vertical and overhead repairs on concrete structures. NOVOLITE will hang on vertical surface up to 4 inches thick with NO slump, and weighs only 4 pounds per gallon.