TFLOOR: 100% solids polymer cement engineered for horizontal concrete repair.
SC1100: 100% solids low viscosity epoxy primer designed to deeply penetrate and seal all concrete substrates prior to topcoat application of epoxy. Virtually eliminates outgassing, which is common when applying an epoxy on concrete surfaces.
SP2000R: Rubber filled version of the SP-2000W designed for immersion service with added flexibility and impact resistance. Typical use: cooling tower basins, floor coating, fountains etc. Has excellent bonding to damp to wet substrates and will cure under water.
SC3300: 100% solids Novolac epoxy designed for long-term chemical immersion service. Offers excellent chemical resistance for numerous chemicals including up to 98% sulfuric acid.
ER100: 100% solids flexibilized epoxy that is a trowelable paste designed for vertical expansion joints (concrete and/or metallic), including joints in cooling tower basins requiring chemical resistance.
ER2000: 100% solids flexibilized epoxy that is pourable for expansion joints requiring chemical resistance.
TFLOOR: 100% solids polymer cement engineered for horizontal concrete repair (curbs, sidewalks, fountain basins, steps, etc).
NOVOLITE: 100% solids polymer cement that has been designed for vertical and overhead repairs on concrete structures. NOVOLITE will hang on vertical surfaces up to 4 inches thick with NO slump, weighs only 4 pounds per gallon and is extremely tough.